How To Disconnect Sprayer Hose From Delta Faucet In 5 Steps

Your kitchen faucet doesn’t always work smoothly due to some leaking problems or other issues. That is why you need to learn how to disconnect sprayer hose from delta faucet. 

As the faucet is a piece of kitchen equipment that we can’t live without, leakage problems are a pain in the neck. Instead of immediately calling a plumber, you can remove the sprayer hose and check what’s going wrong yourself. 

This article will walk you through all the necessary steps to do the job. Let’s scroll down! 

The Relationship Between The Faucet And Sprayer Hose 

The faucets only work when the installation lines are connected to the sink. There’s a tube or so-called hose that has been linked to the sprayer and sprayer head. Through it, the water will reach the tap and emanate from the sprayer since the sprayer’s lock is turned on. 

Water will be redirected from the tap to the sprayer thanks to the small object inside the faucet. It is called a diverter or the middleman. The little thing only operates when the sprayer is turned on. If the middleman is in trouble, there won’t be any water on either side of the faucet.

Read more: Top 10 best luxury kitchen faucets to buy

How To Disconnect Sprayer Hose From Delta Faucet

This step-by-step guide will show you how to disconnect the sprayer hose from your delta faucet by yourself. 

Step 1: Gathering Necessary Tools

We wouldn’t be ready to do and finish the work without the required tools. Visit a hardware store to seek out the replacement parts and buy some essential tools if you don’t have them in your home already. 

Luckily, in this situation, you’ll only need a wrench to do the job. Simply ask your neighbor if you don’t have one. It is quite a handy, multi-purpose tool to own.

Organize the workplace and properly clean everything under the sink. You will work more comfortably and faster in a clean and orderly workplace.

Step 2: Switching Off The Valve And Water Line

Turning off the electricity is the first thing before starting any technical task. And to start any plumbing work, it’s extremely important to make sure there’s no electricity line around as water is a good conductor of electricity.

You need to be extra careful in this step. Unexpected problems will occur and be deadly damaging to yourself and the people around you if you don’t shut off the electrical power.

Additionally, we need to turn off the valve situated below the sink from the get-go. Find the water valve knobs and switch them off to close the water source. If you ignore this step, you’ll risk your clothes and body getting soaked.

Step 3: Draining Water Off The Hose

It is inconvenient to start any type of plumbing task without totally draining water off the hose.  It’s also a significant step in the process.

If the water is still in the hose, it will spread around your kitchen area, and you will waste time tidying up later. All you need to do is put a bucket right under the hose. 

After the water drained off from the sprayer hose, some leftover water will drip off once you disconnect the sprayer hose. At this point, putting the bucket to catch the leftover water. 

Step 4: Removing The C-Clips

Next, you should find the C-clip. C-clip is a metal C-shaped clip whose functions are to secure the hose and prevent leaking and spilling. 

Some models come with this nifty piece, while others don’t. And it’s not easy to identify as it’s the bridge between the tube of the outlet and the sprayer. Manually turn it anticlockwise and then pull it out. Remember to keep it in a safe spot, as you’ll need to put it back later.

Step 5: Disconnect The Sprayer Hose

Be conditional upon the type of your Delta faucet, you might need to deploy different approaches to remove the spray from the hose.

1. Centerset And Single Handle Kitchen Faucet

  • Loosening the head of the sprayer from the hose by rotating the nut counterclockwise 
  • Take the sprayer head out and place it next to you

Note: For old faucets, you might notice mineral build-up around the joint between the hose and sprayer head, making it challenging to turn the nut. 

If you run into this situation, submerge the head into the mixture of water and vinegar for at least 30 minutes. Doing so will get rid of all the deposits, and you’ll find it easier to rotate the nut.

Read more: 7 best ways on how to remove a stuck faucet nut

2. Pull-Out Faucet

For this pull out faucet, the head of a sprayer, and the spout one thing.

  • Pull out the sprayer
  • Prevent the sprayer hose from returning to the neck of the faucet by turning it into a loop
  • There are two mechanisms that connect the head to the sprayer: quick release or threaded connection. Remove the sprayer head by simply pressing the button with the release connection quickly.

For the conventional connection type – threaded mechanism, release the nut with the wrench and then interrupt the sprayer hose.

You’ll need to check whether there are leaking or corrosion signs in both the sprayer head and hose. If there’s any leaking spot, you’ll need to purchase a new sprayer hose. 

Otherwise, reinstall the hose, turn on the water line and check whether there’s any leakage issue. If yes, apply the silicon glue to cover up those points, and you can use your faucet again.

That’s all the steps you’ll need to follow to remove the hose of sprayer hose from your faucet.

Read more: What difference between pull out faucet and pull down faucet?


We’re confident now you know how to disconnect sprayer hose from delta faucet. Keep in mind to keep everything you take out in one place so you’ll lose them, and use some vinegar if there’s any mineral build-up around the sprayer hose.

Without help from a plumber, we can check any leakage issues easily by following this step-by-step guide. Good luck!

Related articles: How to fix a squeaky faucet handle?