How To Remove A Kitchen Faucet Without Basin Wrench?

In today’s article, we will show you how to remove a kitchen faucet without a basin wrench. As you know, the kitchen faucet is an important feature of the kitchen. But, it might have issues such as water leakage, corrosion, low water pressure, improper installation, and so on. As a result, we have to take out the kitchen faucet to fix or replace it from time to time.

When you’ve got a wrench for the basin at hand, removing your spout is an easy task. But what happens if you don’t have such a tool? Fortunately, you can loosen or tighten a mounting nut without a wrench for the basin in case you know to use it correctly.

Basin Wrench – What Exactly Is It?

Basin wrenches are specialized plumbing tools used to access the nuts that secure the faucet to the sink. The nuts on a faucet are usually tucked right under the structure in an extremely hard-to-reach location.

A wrench for the basin with a lengthy shaft and a right-angled head simplifies the task to reach and loosen it.

Anyone who regularly does DIY plumbing needs this handy tool. However, because a wrench for the basin is used for specific tasks, it’s not an instrument most people own. Fortunately, if you require a faucet replacement, there are a few alternatives available to you.

So how to remove a faucet without a basin wrench when you must repair or remove a faucet?

Read more: Best pull out kitchen faucet review 2021

How to Remove A Kitchen Faucet Without Basin Wrench?

Wondering how to remove a kitchen faucet without a basin wrench? Simply put, you’ll need some other wrenches and pliers to complete the task. We will describe each step so that you do not need the help of a plumber.

Essential Things You’ll Need

If you have to replace or fix your kitchen faucet but have no basin wrench, you’ll need to get these cleaning supplies:

  • Channel-lock pliers or water pump pliers
  • Some greases
  • Socket wrenches
  • Screwdriver
  • A cloth

Step-By-Step Guide

Step 1: Close Valves 

Shut off the supply of water before doing any plumbing repairs. The shut-off valve is usually found under your kitchen sink.

By doing so, you won’t wind up with a flooded kitchen. This is one preventative action that should not be overlooked. Put a bucket under the sink to collect any water that remains.

If you’re unsure which valves should be shut off, turn on the faucet. If the water continues to flow, you’ve switched off the incorrect valves. Replace the taps and reactivate them.

Step 2: Release Pressure Bubble

Without water,  the valve will be air-filled. This will make it challenging for you to complete the remaining sections. As a result, releasing the faucet’s water pressure bubble would help.

It’s as simple as turning on the faucet and letting the bubble of pressure out for a couple of minutes. This process ensures the faucet is light to the touch and easy for later removal.

Step 3: Cut Off The Water Pipes 

Now, you must first disconnect the supply of water. Attach the pliers with channel locks to the line of water gently and carefully pull out line by line.

You must proceed with caution during this step. Otherwise, some sections, such as the line of water as well as the faucet, may be damaged.

Although pliers for water pumps may work, pliers with channel locks are your best bet for avoiding damage.

Step 4: Remove The Screws Or Nuts 

One of the important steps on how to change a kitchen faucet without a basin wrench is removing the nuts.

With a socket wrench, remove the mounting nuts from the faucet. If you can’t get the bolts out, try applying grease to the joints of the nut to loosen them up. Use a screwdriver rather than nuts if they’re available on your faucet.

You’ll need to remove the screws once you’ve properly separated the screws or nuts from the kitchen faucet. The socket wrench can nut removal. Connect the wrench to the screw and turn it counterclockwise to remove the screws one by one.

In case your nut is stuck, the article on how to remove a stuck faucet nut may help you.

Step 5: Disconnect And Take Off The Hose

You’ll need to take the hose out of the sink once you’ve completed the screw and nuts removal procedure and place them aside.

Wipe the sink and the faucet with a clean cloth. Check to determine if the faucet may be reused. Buy a new faucet to replace the previous one if it’s broken or cracked.

If you know what kind of mounting system you need, have the new faucet ready to install.

What Can You Do If You Don’t Have A Wrench For The Basin?

Basin wrenches come in a variety of shapes and sizes to suit a variety of tasks. But what if you don’t have this tool? Don’t be concerned as there are many alternatives available.

A socket wrench can be used instead of a wrench for the basin to remove the faucet. You can also use duct tape, coins, or a cable fastener in place of the basin wrench.

Duct Tape

Duct tape comes in handy on nearly every occasion. But, you may be surprised at how well it can loosen bolts. Begin by chopping off a part of around 12 inches. Then, lengthwise, cut or tear the strip in half, creating two long, thin parts.

Stick one strip to the back of the other to ensure that the tape is strong enough to stay in place. Then, wrap the tape around the nut counterclockwise, leaving about 6 inches of tape uncovered.

You can now remove the nut by using the increased leverage gained by tugging on the tape.

Two Coins

You can get more leverage by using two coins instead of a wrench. Grasp two coins on opposing sides of the nut as tightly as possible. Then, using the coins, twist the nut until it can be loosed by hand.

Cable Fastener

Basin wrenches are occasionally replaced by cable fasteners. To loosen the bolts, fasten the desired nut to a cable fastener. Adjust it until the nut is secured in the middle of the bolt head and the nut. Then, you’re good to go.


We hope now you know how to remove a kitchen faucet without a basin wrench. Follow the step-by-step guide above when you need to remove and replace your kitchen faucet without any basin wrench available.

A few steps in the procedure might be frustrating but don’t lose your cool and keep trying until you succeed.

Related articles: